New and used machinery

The SHARK 281 CCS Three-phase 2 Speed semi-automatic sawing machine complete with CCS Cut Control System Kit (device for unmanned cutting) Ideal for cutting various and solid carpentry DEGREE CUT !! OFFER IN PROMO PROMPT DELIVERY!!!!!

Vertical band saws for wood cutting (electric versions)

SN4T = THREE-PHASE

SN4M = SINGLE PHASE

NEW BAND SAW FOR BUILDING Mod. CCE.310

Ideal for renovations

suitable for cutting blocks of

aerated foam cellular concrete

Vertical band saws for wood cutting (electric versions)

SN5T = THREE-PHASE

SN5M = SINGLE PHASE

BAND SAWS FOR GASBETON - PORENBETON:

Easy to use, it is used on most construction sites in Europe to cut Gasbeton - Porenbeton blocks. It performs straight and transversal cuts with precision, moreover with the graduated square supplied, inclined cuts are made from 0 ° to 90 °. It cuts are performed dry without water and due to the characteristic of the blade at low speed, noise and dust are very low.

Pedrazzoli sawing machine Mod. S.N. 270 WIDE CHOICE OF USED SAWS; Model: S.N. 270; Overall dimensions: 3000x1800x1800mm; Net Weight: 1.000Kg;

TECHNICAL DATA THREE-PHASE MOTOR 4/8 POLE BELT ROTATION KW 0.9-1.8

RPM NG / 1 720-1450

REDUCER IN OIL BATH RATIO 1:20

FLYWHEEL DIMENSIONS MM

BLADE DIMENSIONS 2825X27X0.9

THICKNESS OR CUTTING SCRAP MM 1.2

CUTTING SPEED M / MIN 35-70

TAPE TENSION ATM 37-40

ARCHET INCLINATION DEGREES 35

CUTTING RANGE DEGREES 45DX-45SX

ELECTRIC PUMP 0.06 KW REFRIGERANT TANK INCORPORATED IN THE BASE LT. 12

VICE FEATURES FRONT VICE WITH QUICK APPROACH AND QUICK PIECE LOCKING, POSITIONABLE IN LONGITUDINAL DIRECTION ALONG THE VICE OPENING BASE.

Vertical band saws for wood cutting (electric versions)

SN6T = THREE-PHASE

SN6M = SINGLE PHASE

NEW TECHNOLOGICAL SAW FOR BUILDING:

Easy to use, it is used on most construction sites in Europe to cut Cellular Concrete blocks. It performs straight and transversal cuts with precision, moreover, with the graduated square supplied, inclined cuts from 90 ° to 180 ° are made both in the left and right position of the blade. The cuts are carried out dry without water and due to the characteristic of the low speed blade, noise and dust are very low.

FORTE SBA 421 / S automatic band saw

technical features of the FORTE SBA 421 / S automatic band saw used are:

Round cutting capacity 420 mm

Square cutting capacity 420 x 420 mm

Worktop height 900 mm

Blade development mm 6050 x 41 x 1.3

Guide blade synchronous to the vice

Flywheel diameter mm 720

Clamping width 10/420 mm

Single carriage advancement 680 mm

Cutting speed from 12 to 50 m / min or from 24 to 100 m / min

Machine weight 3600 kg

Vertical band saws for wood cutting (electric versions)

SN7T = THREE-PHASE

NEW TECHNOLOGICAL SAW FOR BUILDING:

Easy to use, it is used on most construction sites in Europe to cut Cellular Concrete blocks. It performs straight and transversal cuts with precision, moreover, with the graduated square supplied, inclined cuts from 90 ° to 180 ° are made both in the left and right position of the blade. The cuts are carried out dry without water and due to the characteristic of the low speed blade, noise and dust are very low.

Semi-automatic band saw for 0 ° cuts.

Arch structure made of steel.

5 ° inclined blade to facilitate cutting profiles.

Vertical band saws for cutting wood

SERIES C - CARDANO

SN5C C520Z series

SN5EZT C520Z series

SN5EZM C520Z series

Brick band saw

The new technology for the construction site.

Cutting precision with feed controlled by handwheel with quick release for quick return of the table

New clutch that guarantees a constant cut even in case of excessive advancement of the table

Easy to use, it performs dry cuts without water with precision and due to the characteristic of the blade at low speed, noise and dust

FORTE SBA 241

FORTE SBA 241 automatic band saw, overhauled, repainted, guaranteed 1 year. Complete with chip unloader. Year of construction 2002

AUTOMATIC MODEL SBA 241.S

CUTTING CAPACITY: 250 mm

LENGTH OF CUT WITH ONE FEED: from 3 to 400 mm

WORKTOP HEIGHT: 750 mm

TOTAL POWER: 4.8 kW

CUTTING SPEED: from 11 to 110 m / min -

BLADE SIZE: 4100x34x1.1 mm -

NET WEIGHT: approx. 1650 kg

Vertical band saws for cutting wood

SERIES C - CARDANO

SN6C C620Z series

SN6EZT C620Z series

SN6EZM C620Z series

FORTE SBA 361 automatic band saw, overhauled, repainted, guaranteed 1 year, complete with chip unloader. Year of construction 2002

TECHNICAL SPECIFICATIONS

... maximum cutting height: 360 mm

... length of the saw band: 4870 mm

... width of the saw band: 41 mm

... disc diameter: 550 mm

... min.clamping capacity: 10 mm

... clamping diameter max. 360 mm

Bgnt3x9snu

... bar feed max. (single stroke): 400 mm

... min. cutting speed: 11 m / min

... cutting speed max .: 110 m / min

... number of speeds: 2

DIMENSIONS / WEIGHTS

... space requirements -left / right-: 3170 mm

... space requirements -front / back-: 2225 mm

... total height: 2220 mm

... total weight approx .: 2100 kg

Vertical band saws for cutting wood

SERIES C - CARDANO

SN7C C720Z series

SN7ZT C720EZ series

FORTE SBA 421 / S automatic band saw

technical features of the FORTE SBA 421 / S automatic band saw used are:

Round cutting capacity 420 mm

Square cutting capacity 420 x 420 mm

Worktop height 900 mm

Blade development mm 6050 x 41 x 1.3

Guide blade synchronous to the vice

Flywheel diameter mm 720

Clamping width 10/420 mm

Single carriage advancement 680 mm

Cutting speed from 12 to 50 m / min or from 24 to 100 m / min

Machine weight 3600 kg

Trolley for cross cutting of logs code TSC 2633 for models 520/620/720

FORTE SBA 531 sawing machine.

complete with chip unloader and vertical hydraulic clamps for beam cutting.

overhauled, repainted, 1 year guaranteed.

Delivery at our expense, possibility to keep it on trial for 3 months. Installation and commissioning by the buyer.

Two-column metal band saw, with automatic operation and high precision. The machine is mainly used for cutting steel, where it stands out in high productions for speed and for cutting super alloys and stainless steel.

Fully automatic 2 column band saw

- belt and cutting speed continuously adjustable from 20 - 130 m / min.

- single feed length up to 500mm and multiple up to 1500mm, hydraulic; (multiple feed)

- residual length: single cut 80mm and in automatic mode 120mm

- jaws LxH: 280 x 140 mm

- pre-selection of the quantity

- possibility of blocking the layer and the bundle

- minimum size to be sawed: Ø 10mm

- hydraulically and continuously adjustable clamping of the material